Hydrocyclone / Cyclone Cluster
Hydrocyclone is a kind of equipment used for grading the ore pulp by using centrifugal force. Without motion and power unit, it needs to match with relevant slurry pump. It is mainly used in ore dressing industries for grading, separating, concentrating and desliming.
Category: Gravity separation equipment
Machine Details Show
Description & Technical Data
Hydrocyclone has several features, such as low equipment cost, easy assembling and disassembling, convenient maintenance, less area covers and low cost of construction. In addition, there are some other advantages like large capacity of unit volume, treatment, fine separation size, high grading efficiency, the time and quantity of the ore pulp that staying in the cyclone is short and small. Therefore, it’s easy to operate when it stops working.
Technical Data
| Model | Interior Dia (mm) | Cone Angle | Pipe Dia (mm) | Feeding Size (mm) | Feeding Pressure (Mpa) | Processing Capacity (m3/h) | Range (um) | Dimensions (L*W*H)(mm) | Weight (Kg) |
|---|---|---|---|---|---|---|---|---|---|
| FX660 | 660 | 20 | 180-240 | 16 | 0.03-0.2 | 250-350 | 74-220 | 1250*890*2650 | 990 |
| FX500 | 500 | 20 | 130-200 | 10 | 0.03-0.3 | 140-220 | 74-200 | 850*790*2050 | 495 |
| 15 | 130-200 | 10 | 0.03-0.3 | 140-220 | 74-150 | 850*790*2380 | 540 | ||
| FX350 | 350 | 20 | 80-120 | 6 | 0.04-0.3 | 60-100 | 50-150 | 775*605*1765 | 220 |
| 15 | 80-120 | 6 | 0.04-0.3 | 60-100 | 50-120 | 775*605*2115 | 235 | ||
| FX300 | 300 | 20 | 65-115 | 5 | 0.04-0.3 | 45-85 | 50-150 | 665*585*1310 | 108 |
| 15 | 65-115 | 5 | 0.04-0.3 | 45-85 | 40-100 | 665*585*1505 | 169 | ||
| FX250 | 250 | 20 | 60-100 | 3 | 0.06-0.35 | 40-60 | 40-100 | 540*480*1180 | 79 |
| 15 | 60-100 | 3 | 0.06-0.35 | 40-60 | 40-100 | 540*480*1220 | 84 | ||
| 10 | 60-100 | 3 | 0.06-0.35 | 40-60 | 30-100 | 540*480*1380 | 92 | ||
| FX200 | 200 | 20 | 40-65 | 2 | 0.06-0.35 | 25-40 | 40-100 | 435*360*1050 | 54 |
| 15 | 40-65 | 2 | 0.06-0.35 | 25-40 | 30-100 | 435*360*1115 | 59 | ||
| 10 | 40-65 | 2 | 0.06-0.35 | 25-40 | 30-100 | 435*360*1205 | 66 | ||
| FX150 | 150 | 20 | 30-45 | 1.5 | 0.06-0.35 | 11-20 | 30-74 | 280*295*690 | 32 |
| 15 | 30-45 | 1.5 | 0.06-0.35 | 11-20 | 30-74 | 280*295*900 | 36 | ||
| 8 | 30-45 | 1.5 | 0.06-0.35 | 11-20 | 30-74 | 280*295*1270 | 42 | ||
| FX125 | 125 | 17 | 25-40 | 1.0 | 0.06-0.35 | 8-15 | 20-100 | 210*185*620 | 10 |
| 8 | 25-40 | 1.0 | 0.06-0.35 | 8-15 | 20-74 | 250*240*985 | 12 | ||
| FX100 | 100 | 20 | 20~40 | 1.0 | 0.06~0.35 | 5~12 | 20-100 | 260*210*525 | 8.0 |
| 15 | 20~40 | 1.0 | 0.06~0.35 | 5~12 | 20-100 | 268*215*720 | 13 | ||
| 8 | 20~40 | 1.0 | 0.06~0.35 | 5~12 | 20-100 | 268*215*1045 | 30 | ||
| FX-75 | 75 | 15 | 15~22 | 0.6 | 0.1-0.4 | 2~5 | 20-74 | 240*230*462 | 4.2 |
| 6 | 15~22 | 0.6 | 0.1-0.4 | 2~5 | 5-40 | 240*230*800 | 7.0 |
Please leave your message, we will contact you asap!
Please leave your message, we will contact you asap!
Frequently Asked Questions
Q: What is the smallest gold particle size this concentrator can recover?
A: It can recover gold particles as fine as 0.004mm, with a recovery rate of approximately 97% for this size fraction.
Q: How often do I need to clean out the concentrate?
A: The cleaning-up cycle is typically 1–4 hours for vein gold and 2–6 hours for placer gold, depending on the grade of your ore.
Q: Does this machine require chemicals?
A: No. The centrifugal concentrator uses only water and electricity. It is a completely physical separation process with zero chemical pollution.
Q: Can I use this concentrator for tailings re-processing?
A: Yes. It is widely used to recover fine gold from old tailings, grinding circuit discharges, and flotation concentrates where fine gold has not been fully captured.
Why Choose Hengcheng for Your Gold Recovery Project?
With over 25 years of experience in mineral processing equipment manufacturing, we specialize in designing customized gravity separation circuits for alluvial gold, rock gold, and complex ores. Furthermore, we provide a full package of services—from engineering consultation and ore testing to on-site installation, commissioning, and personal training. Therefore, you can rely on us from the very beginning of your project to the final operation.
