Induction Melting Furnace
It can melt gold,silver,copper,steel,aluminium, gold dust sands, electrolysis mud, gold and silver powder, tin ash tin slag etc.
Machine Details Show
Description & Technical Data
Features of induction melting furnace:
1.Induction heating melting furnace use crucible high temperature to heat metal.then can melt,refine,casting,etc production.
2.Can melt platinum, rhodium and palladium,gold,silver,copper,steel,aluminium, Activated carbon, gold dust sands, electrolysis mud, gold and silver powder, tin ash tin slag etc.
3.Induction heating melting furnace can melt weight from 0.001KG–500KG per time.melting time from 5–40 minutes.max temperature will be 1500C–2000C.
4.Induction heating melting furnace have fixed type,push out type,auto pouring type,furnace up down moving type.
Advantage :
1.IGBT(INFINEON) technology, high conversion efficiency;
2.Energy saving 15%-30% , compared to SCR/KGPS technology Much more efficient than gas-fired and coal-fired method
100% start-up success rate; power factor > 95%
3.Perfect and complete protection functions, increasing machine’s reliability & stability
4.No special foundations required, Low operating cost, Easy operation
5.Modular design, ease of maintaining and repairing
Technical Data
| Model | Steel, iron, stainless steel melting amount | Copper, gold, silver melting amount | Aluminum melt amount |
|---|---|---|---|
| GP-15 | 0.5kgs | 2.0kgs | 0.5kgs |
| GP-25 | 1.0kgs | 3-4.0kgs | 1.0kgs |
| ZP-15 | 4.0kgs | 5-10kgs | 3.0kgs |
| ZP-25 | 8.0kgs | 20kgs | 6.0kgs |
| ZP-35 | 12.0kgs | 40kgs | 12.0kgs |
| ZP-45 | 18.0kgs | 70.0kgs | 21.0kgs |
| ZP-70 | 28.0kgs | 100kgs | 30kgs |
| ZP-90 | 45.0kgs | 120kgs | 40kgs |
| ZP-110 | 60.0kgs | 150kgs | 50kgs |
| ZP-160 | 100kgs | 250kgs | 75.0kgs |
Please leave your message, we will contact you asap!
Please leave your message, we will contact you asap!
Frequently Asked Questions
Q: What is the smallest gold particle size this concentrator can recover?
A: It can recover gold particles as fine as 0.004mm, with a recovery rate of approximately 97% for this size fraction.
Q: How often do I need to clean out the concentrate?
A: The cleaning-up cycle is typically 1–4 hours for vein gold and 2–6 hours for placer gold, depending on the grade of your ore.
Q: Does this machine require chemicals?
A: No. The centrifugal concentrator uses only water and electricity. It is a completely physical separation process with zero chemical pollution.
Q: Can I use this concentrator for tailings re-processing?
A: Yes. It is widely used to recover fine gold from old tailings, grinding circuit discharges, and flotation concentrates where fine gold has not been fully captured.
Why Choose Hengcheng for Your Gold Recovery Project?
With over 25 years of experience in mineral processing equipment manufacturing, we specialize in designing customized gravity separation circuits for alluvial gold, rock gold, and complex ores. Furthermore, we provide a full package of services—from engineering consultation and ore testing to on-site installation, commissioning, and personal training. Therefore, you can rely on us from the very beginning of your project to the final operation.
