PC Hammer Crusher
Hammer crusher is suitable for mid-hard and light erosive materials, of which pressure resistance strength is no more than 100Mpa and humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limestone, etc.
Category: Crushing & Milling equipment
Machine Details Show
Working principle & Technical Data
The PC Hammer crusher is suitable for both dry and wet crushing of brittle, medium-hard materials for the mining,coal, metallurgic, construction material, road building, and chemical industries. the maximum compressible resistance of the crushed materials can be up 150Mpa.
Working principle
In the hammer crusher, the motor drives the rotor to rotate at a high speed through the belt, and on the rotor there are series of hammers. When the materials get into the working area of hammers, the rotating hammers with high rotation speed are crushing them, the crushed products meeting the required size can be discharged by the outlet and become the final products.
Technical Specification
| Model | Rotary Speed(r/min) | Feeding opening(mm) | Max feeding size(mm) | Discharge size (mm) | Capacity(t/h) | Power(kw) | Weight (t) | Dimensions(mm) |
|---|---|---|---|---|---|---|---|---|
| PC400*400 | 1500 | 145*450 | 100 | 0-30 | 5-8 | 7.50 | 0.9 | 844*942*878 |
| PC600*400 | 1000 | 295*450 | 100 | 0-35 | 10-12 | 18.5 | 1.03 | 1054*972*1117 |
| PC600*600 | 1000 | 295*570 | 100 | 0-35 | 12-18 | 45.0 | 2.14 | 1315*840*1501 |
| PC800*600 | 1000 | 350*570 | 100 | 0-45 | 20-25 | 55.0 | 2.45 | 1515*2586*1040 |
| PC800*800 | 1000 | 350*850 | 100 | 0-45 | 35-45 | 55.0 | 3.05 | 1515*2831*1040 |
Please leave your message, we will contact you asap!
Please leave your message, we will contact you asap!
Frequently Asked Questions
Q: What is the smallest gold particle size this concentrator can recover?
A: It can recover gold particles as fine as 0.004mm, with a recovery rate of approximately 97% for this size fraction.
Q: How often do I need to clean out the concentrate?
A: The cleaning-up cycle is typically 1–4 hours for vein gold and 2–6 hours for placer gold, depending on the grade of your ore.
Q: Does this machine require chemicals?
A: No. The centrifugal concentrator uses only water and electricity. It is a completely physical separation process with zero chemical pollution.
Q: Can I use this concentrator for tailings re-processing?
A: Yes. It is widely used to recover fine gold from old tailings, grinding circuit discharges, and flotation concentrates where fine gold has not been fully captured.
Why Choose Hengcheng for Your Gold Recovery Project?
With over 25 years of experience in mineral processing equipment manufacturing, we specialize in designing customized gravity separation circuits for alluvial gold, rock gold, and complex ores. Furthermore, we provide a full package of services—from engineering consultation and ore testing to on-site installation, commissioning, and personal training. Therefore, you can rely on us from the very beginning of your project to the final operation.
